BTQVW - POLYSTYRENE, 400
- MSDS: BTQVW
- Manufacturer: SCIENTIFIC POLYMER PRODUCTS INC
- Product Name: POLYSTYRENE, 400
- National Stock Number: 6810-00N047324
Product Identification
Product ID:POLYSTYRENE, 400
MSDS Date:03/01/1991
FSC:6810
NIIN:00N047324
MSDS Number: BTQVW
Responsible Party
ONTARIO, NY 14519
US
Emergency Phone: 716-265-0413
Info Phone: 716-265-0413
Cage: 0MW60
Contractor
Telephone: 716-265-0413
Cage: 0MW60
Ingredients
SYTRENE POLYMER; (POLYSTYRENE)
CAS: 9003-53-6
RTECS: WL6475000
Fraction By Weight: 99.9%
OSHA PEL N/K
ACGIH TLV: N/K
ADDITIVES
Fraction By Weight: <0.1%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE FROM EXPOSURE. IF
BREATHING STOPS, BEGIN MOUTH TO MOUTH. EYES:FLUSH WITH WATER FOR AT
LEAST 15 MINUTES. SKIN:WASH AFFECTED AREA WITH SOAP AND WATER. REM
OVE DIRTY CLOTHING. IN ALL CASES, IF IRRITATION DEVELOPS, SEEK
MEDICAL ASSISTANCE.
Fire Fighting
Flash Point Method:COC
Flash Point:977F,525C
Extinguishing Media:DRY CHEMICAL, CO*2, WATER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:DECOMPOSITION MAY RESULT IN RELEASE OF
CO*2 AND ORGANICS OF UNKNOWN CHEMICAL COMPOSITION. FLAMMABLE DUST
WHEN FINELY DIVIDED & SUSPENDED IN AIR.
Accidental Release
Spill Release Procedures:SWEEP UP SPILL AND PLACE IN CONTAINERS FOR
SALVAGE OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:TREAT AS A COMBUSTIBLE SOLID. STORE
AWAY FROM OXIDIZING MATLS IN A COOL, DRY PLACE WITH ADEQUATE
VENTILATION.
Other Precautions:KEEP AWAY FROM HEAT AND OPEN FLAMES. KEEP CONTAINERS
TIGHTLY CLOSED. NOTE:THIS MATERIAL IS INTENDED FOR LABORATORY USE
ONLY. IT IS NOT INTENDED FOR DRUG, HOUSEHOLD OR OTHER USES.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST ADEQUATE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:ANSI APPRVD EMERGENCY EYE WASH & DELUGE
SHOWER .
Work Hygienic Practices:GOOD HYGIENE PRACTICES SHOULD BE STRICTLY
FOLLOWED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:>212F,>100C
Spec Gravity:1.05
Solubility in Water:INSOLUBLE
Appearance and Odor:COLORLESS, ODORLESS PELLET
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:CO AND ORGANICS OF UNKNOWN CHEMICAL
COMPOSITION.
Disposal
Waste Disposal Methods:IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.